Click a frequently asked question below to see the answer. Cable is tangling in the pool. There is too much cable length in the water. Do not unravel the entire cable length. Place only the required length of cable in the water and place the rest on the side of the pool. Follow the procedure in "Cord Tangling" in the manual to avoid and correct tangled cord. The cleaner does not or no longer climbs the pool sides. 1. The filter canister is full or dirty. Clean the filter canister, see "Cleaning the Filter Canister" in manual. Sides of pool are slippery or slimy. Although the water seems clear, microscopic algae, invisible to the human eye, are present in the pool. As a result the pool sides become slippery and prevent the cleaner from climbing. Check tires for wear and replace as necessary. Do a shock chlorination treatment and slightly reduce the pH. DO NOT leave the cleaner in the pool during this treatment. The cleaner does not stay firmly on the pool bottom.

1. There is air in the appliance casing. Submerge the cleaner following the procedure in "Submerging the Cleaner" in the manual.2. The filter canister is full or dirty. The cleaner is not cleaning effectively. 1. The brushes have become smooth or the "wear" indicator shows. Replace the brushes following the procedure in "Replacing the Brushes" in the manual.2. pool cleaning routes for saleFilter canister is full or dirty. pool cleaning service escondidoClean the filter canister following the procedure in "Cleaning the Filter Canister" in the manual. best robotic swimming pool cleanersMake sure the floating cable is spread out over the pool. diy carpet cleaning without a machine

Ensure the cable is not too tightly wrapped or coiled when storing. If the problem persists, lay the cable straight in the sun to relax it and remove kinks. The flashing indicator lights (9350/P935) or error code on the display (9450/P945, 9550/P955) appear just after start (either pressing Power or Cycle button for less than 20 seconds). 1. Unplug floating cable from the control unit and reconnect.2. pool cleaning walmartRemove cleaner from the pool and re-submerge, see "Submerging the Cleaner" in the manual.3. easy way to clean plastic shower curtain linerPropellor or wheels may be jammed and not turning correctly. Contact Polaris Technical Support at (USA) 1-800-822-7933 or (Canada) 1-888-647-4004. The flashing lights appear during the cleaning cycle. Cleaner may be sucking air (lights will appear after 60 seconds air intake).

Remove cleaner from the pool and re-submerge, see "Submerging the Cleaner" in the manual. On startup the cleaner does not move. 1. The outlet, the control unit is connected to, is not supplying electrical power. Check that the outlet to which the control unit is connected is receiving electricity.2. Check that you have started one (1) of the two (2) programs and check that the indicator for the selected program is lit. If the indicator light is not lit, turn the wheels then disconnect the control unit and wait at least 20 seconds before reconnecting. If the problem persists, contact Polaris Technical Support at (USA) 1-800-822-7933 or (Canada) 1-888-647-4004.TRUE 4WD Rapids 4WD runs on a true 4 wheel drive system. The drive system powers all 4 wheels as well as a rotating brush underneath the cleaner itself. ROTATING SCRUBBING BRUSHloosen ups stubborn dirt and debris. The brush is removable for easy maintenance. LARGE DEBRIS BASKETS capture an extraordinary amount of debris and make for easy emptying and cleaning.

In Store OnlyNot Available Online Key Features & Performance Shape: Rectangle, Lap, Kidney, L-Shape, Round, Oval Surfaces: All Including Tile PVA Wheels Available for pods Pool to Wall Transition: 90 Degree Angle Aquabot® No Tangle Swivel NEW  prevents cable from tangeling Power Consumption: 180 Watts Dimentions: 20"x 21"x 17" Shipping Weight: 30 lbs Cleans: Pool Floors and Walls Compatible with External Timer *External Timer Not Included 70 Gallons per Minute Rapids 4WD Robotic Pool Cleaner Operators Manual The Best on The Market! “After years of fighting with and repairing Polaris and RayVac cleaners, I finally stumbled upon the Aquabot. Just plug it in to power, drop it in the pool and watch it go. This does not connect to the filter system in any way. Go out and get one right now!” –rg21Top-of-the-line 4WD robotic pool cleaner The Polaris P955 features an Easy Lift System, motion-sensing handheld remote, dirty canister indicator, and Vortex Vacuum technology for best-in-class cleaning performance.

The Polaris P955 4WD provides best-in-class cleaning performance and features. The absolute top-of-the-line P955 tackles any pool terrain, climbs steps and walls, and scrubs tile line with a solid-blade scrubbing brush. One of the distinct advantages of the P955 is the smart 7-day programmable timer, with fully customizable cleaning cycles that allows pool owners to set it and forget it. With just a simple setting, you can clean the pool as frequently as you like and enjoy a pleasant, healthy pool all the time. In addition, the new and intuitive motion sensing remote puts the cleaning control in the palm of your hand. Just point and direct the P955 to any desired location in the pool and you will never miss a spot. It is also the only model in the family that features a dirty canister indicator. The P955 cleans pools up to 60' in length. It includes a new premium, compact transport caddy that can be assembled in just minutes without using any tools. Model is backed by a 2 year limited warranty.

Motion-Sensing Remote - Responsive cleaning control in the palm of your hand. Easy Lift System - With the touch of a button the P955 surfaces to a desired location and waits for you to grab it, then automatically evacuates water for effortless removal from the pool. Vortex Vacuum Technology - 25% more vacuum power and 4x more debris capacity than other cleaners. Easy Clean Filter Canister - debris can easily be emptied with a simple shake and spray convenience. 7-day programmable timer - fully customizable set it and forget it cleaning modes. ActivMotion Sensor® - automatically controls robot's position at all times, allowing complete cleaning coverage without any hang ups. 4-Wheel Drive Technology - cleans pool floor, walls, and scrubs tile line with pleated scrubbing brush. Waterline Only Cleaning Cycle - for isolated tile line scrubbing. Easy Clean Filter Canister Floor, Floor/Wall, Waterline Only, Custom Rear Water Cleaning Stream